.png)
T08 and T13 models
The Caravel puller/fitter allows you to replace the worn bushings placed on the stern stand without removing the propeller shaft. The use of these machines allows significant savings in terms of time and costs.
Caravel offers this machine in two models: T08 (designed for shaft diameter from 25 to 42 mm) and T13 (designed for shaft diameter from 45 to 80 mm). The machine can be purchased with the appropriate manual pump. Each type of bushing requires a set of push half-shells and rings and half-rings, for whose availability and price we suggest you contact us for a quote.
The old bearing can be replaced very easily, without resorting to expensive and tiring DIY methods such as jigsaws, hoses, wedges and hammers.
The extractor is extremely easy to use and does not require special training.
Being equipped exclusively with manual actuation, the T08 and T13 are not configured as machines according to the Machinery Directive and do not require CE marking.
The use of Caravel extractors makes it possible to insert the new bushing without the need to remove the shaft and, therefore, makes it possible to avoid realigning the axle.
Over the years, we have produced more than 5,000 different types of bushings for axes from 12 to 500 mm.
Download the catalog and choose the bush that's right for you.
Standard products are always ready in stock and therefore immediately available.
We can design and manufacture bushings of various sizes and materials for large boats, hydroelectric and nuclear power plants, aqueducts, vertical and submersible pumps, wastewater plants and animal husbandry.
An innovative and patented system that allows the construction of large bearings (min. axis diameter 80 mm. — max axis diameter 500 mm.) by preparing the bearing and avoiding the construction of the internal core for molding. The Ploughing system offers, in addition to significant economic savings, another series of advantages:
Greater precision on the size of the inner diameter, made possible by the use of a round inner core, without protrusions that can be ground and brought to hundredth tolerances
Obtaining radius slats that increase bearing capacity and durability, especially when the axle works horizontally (for an obvious matter of weight). Once the life of the bearing is over, following the grinding of the axis, the core can be ground to the same extent for molding and obtain the new bearing with the internal diameter suitable for the new axis size.
Significant reduction in delivery times ranging from about 20 days to only 4-5 working days.
Contact us
Do you want to receive a quote or do you want to explain your project to us? Contact us and we'll get back to you as soon as possible.
